(866) 455-2132
Exhaust hose and adapter capturing emissions at the tailpipe of a car on a dynamometer

Dyno Exhaust Extraction Systems

High-temperature exhaust extraction for dynamometer testing, built to handle high-volume airflow without affecting test results.

Dyno Exhaust Removal

Dynamometers can be especially tricky for vehicle exhaust extraction. While dynamometers come in several different forms, the issue of temperature is always a factor.

Engines running at or near their capacity for long periods of time generate exorbitantly higher temperatures than the average engine at an idle. In addition, they produce a heavy air flow at a high volume.

In the case of a performance testing dyno, a direct nozzle connection could affect the performance results of the vehicle being tested.

The specialists at Fume-A-Vent are experts in this area and can create an engineered system to fit your exact dynamometer application needs.

The Basic Parts of a Dyno Exhaust Removal System

Dyno testing pushes engines to their limits, so every part of the system has to handle more heat and more airflow than a standard service bay. Most dyno systems are built from three main components:

High-temperature exhaust hose

High-Temperature Exhaust Hose

Engines running at full load for long periods produce far higher exhaust temperatures than an engine at idle. Our high-temperature hoses, rated up to 600°F, carry that exhaust safely to the fan.

Tailpipe adapter for dyno exhaust capture

Tailpipe Adapter

Tailpipe adapters capture exhaust right at the source, before emissions reach the breathing zone. Instead of clamping directly onto the tailpipe, the adapter captures exhaust without sealing to it, so it won’t affect the performance results of the vehicle being tested. Dual-exhaust vehicles can be captured at both tailpipes at once.

High-volume exhaust fan

High-Volume Exhaust Fan

A fan sized for heavy, high-volume airflow pulls the exhaust out of the dyno room without creating air currents that would affect test results. It can be direct mounted or connected to ductwork and a central fan.

Dual chrome exhaust cones capturing emissions from a Mustang on the dynamometer at Franjo Speed
Case Study

Dynamometer Exhaust Removal

Franjo Speed sells high performance parts that improve speed, horsepower, handling, sound, and the ECT of cars. Also, they offer dynometer services that will test the performance of the vehicles.

View the full case study

Wall System

Request a Quote

If your garage workstations are in relative proximity to a wall, then the wall-mounted system might be a good fit for your garage. Wall-mounted systems offer a simple method for making effective use of a centralized ducting and exhausting system. With this system, each bay can be easily opened and closed with a quick sliding gate right at the duct/hose connection. When you need to use this system, simply unhook the hose, connect the nozzle to the tailpipe and open the gate.

Wall System Explained

  1. Crushproof hose connects directly to the central duct ventilation system and is mounted at the end of a garage bay.
  2. Station can be closed by a simple damper installed at the hose connection point.
  3. When needed, simply remove the hose from its hanger, attach the nozzle to the vehicle, and open the damper.
Wall-mounted exhaust removal system explained
^ Back to Top

Call us today to learn more about dyno exhaust removal systems or request a free, custom quote!

Reach us by mail at info@fumeavent.com or by phone at (866) 455-2132.

Request a Free Quote

How can we help?
seals